MEM-8901 MOUNTING INSTRUCTIONS
SPORTSHIELD
HONDA VT750 SHADOW
AERO ‘04
TOOLS REQUIRED
Towels
Ratchet, 8mm socket
6mm Allen wrench
(provided)
10mm socket
3/16” Allen wrench
(provided)
13mm socket
7/16” or 11mm wrench
Always cover
the front fender and gas tank with a towel to prevent possible damage during
installation.
1. Loosely install the two
mounting plates onto the windshield. The santoprene
grommet should be inserted through the holes of the windshield so that the flat
round part of the grommet lays flat on each side of the windshield.
Install Note: *– Tabs will point away
from headlight cutout when installed correctly.
2. Using a ratchet with an 8mm
socket and a 10mm socket remove the two bolts on each side of the lower triple
tree that secure the fork tines (chrome covers) – total of four bolts.
With the ratchet, a 10mm socket and a
13mm socket, and the bolts and washers from the kit, install stainless steel
lower brackets
3. Using the 6mm Allen wrench
provided, remove the two, original, upper triple tree pinch bolts. Replace them
with the
L- shaped upper bracket assemblies. New
longer bolts with spacer are provided
4. Once all four mounting
brackets are in place, and secure, loosen the four quick-change bolts on the
mounting brackets and slip the windshield onto the motorcycle. Start the bottom slot first before engaging
the upper slot.
5. With the windshield in
place, adjust the angle to the desired position, and tighten the quick-change
bolts.
WARNING: NEVER RIDE WITH ANY PART OF THE
MOUNTING HARDWARE MISSING OR LOOSE
Care and Cleaning Instructions
To clean your windshield,
use only warm water and a mild non-abrasive, dishwashing liquid. Use a soft
cloth, such as a T-shirt or flannel cloth. To protect your windshield, please
use Novus #2 to remove minor scratches,
or use a polish like Memphis Shades Shinola
which is specially designed for plastic windshields; glass cleansing agents
will cause severe damage to your windshield and will void
your warranty.
Never use
any glass products, petroleum based chemicals, or cleaning agents with ammonia,
bleach or any harsh chemicals. This includes Rain-X, brake fluid, acetone, and
gasoline.
MEM-8901
MOUNTING KIT
SPORTSHIELD HONDA
VT750 SHADOW AERO ‘04
|
PART # |
DESCRIPTION |
QTY. |
|
M8901 |
MOUNTING INSTRUCTIONS/PART LIST |
1 |
|
M764 |
HONDA VT750 UPPER BRACKET |
2 |
|
M1051 |
HONDA VT750 PLATE–LEFT |
1 |
|
M1052 |
HONDA VT750 PLATE–RIGHT |
1 |
|
M1047 |
HONDA VT750 |
1 |
|
M1048 |
HONDA VT750 LOWER BRACKET-RIGHT |
1 |
|
M320 |
8mm X 45mm SS SOCKET HEAD CAP SCREW |
2 |
|
M321 |
5/16” SS WASHER |
4 |
|
M591 |
PINCH BOLT SPACER |
2 |
|
M505 |
BUTTON NUT |
8 |
|
M586 |
RECESSED SPACER WASHER |
4 |
|
M501 |
BEVELED SOCKET WASHER |
4 |
|
M504 |
SOCKET SHOULDER WASHER |
4 |
|
M543 |
SANTOPRENE GROMMET |
4 |
|
R300 |
8mm x 16mm SS HEX HEAD SCREW |
2 |
|
R301 |
6mm x 16mm SS HEX HEAD SCREW |
2 |
|
R302 |
¼” SS FLAT WASHER |
2 |
|
M302 |
1/4”- 20 X 1/2” SOCKET HEAD CAP SCREW |
8 |
|
M310 |
3/16” SHORT ARM ALLEN WRENCH |
1 |
|
M313 |
3/16" SHORT ARM ALLEN WRENCH COVER |
1 |
|
M311 |
6mm SHORT ARM ALLEN WRENCH |
1 |
|
M314 |
3/16” T-HANDLE ALLEN WRENCH |
1 |
|
M337 |
3/16” T-HANDLE WRENCH COVER - YELLOW |
1 |
FOR MISSING OR REPLACEMENT PARTS OR WARRANTY
INFORMATION CONTACT:
Memphis
P.O.
(901) 853-0293
VISIT US ON THE WEB AT:
CUSTOMER SERVICE
customerservice@memphisshades.com