H-D COVERED INSTRUCTIONS/PARTS LIST

TOOLS REQUIRED: 3/16” Allen wrench

7/16” or 11mm wrench

1. Loosely attach the two mounting plates onto the windshield, using the bottom and third bolt up. The small tab goes at the bottom, big tab at the top. (see Figure 1)

Note: Tabs on the mounting plates should point in towards each other when installed correctly.

2. Loosen the four mounting bolts for the sport windshield, then remove the windshield and set it aside.

3. Install the Fats/Slims windshield by slipping the plates into the grooves between the spacers, and tighten down all the bolts. (see Figure 2)

Warning: Never ride with any part of the hardware missing or loose.

Fig. 1 mounting plate to w/s Fig. 2 mounting bolts for plates

CARE AND CLEANING

To clean your windshield, wash it with warm water and a mild, non-abrasive, dishwashing liquid. Use a soft cloth such as aT-shirt or flannel cloth.

To protect your windshield, use NOVUS #2 to remove minor scratches, or use polish specially designed for plastic. NEVER use glass cleansing agents, they may cause severe damage to your windshield.

Never use any petroleum-based chemicals, or cleaning agents with ammonia.

This includes Rain-X, brake fluid, acetone and gasoline
MEM-9813 MOUNTING KIT

MEMPHIS FATS/SLIMS MOUNTING PLATES H-D COVERED

PART#	DESCRIPTION	QTY.
M813	INSTRUCTIONS/PARTS LIST	1
M705	FATS/SLIMS MOUNTING PLATE - LEFT	1
M706	FATS/SLIMS MOUNTING PLATE - RIGHT	1

FOR MISSING OR REPLACEMENT PARTS OR WARRANTY INFORMATION CONTACT:

Memphis Shades

P.O. BOX 24

COLLIERVILLE, TN 38017

(901) 853-0293

VISIT US ON THE WEB AT

www.memphisshades.com

CUSTOMER SERVICE

customerservice@memphisshades.com