MEM-9821
MOUNTING
PLATES
FOR H-D NARROW
1.
Install the windshield onto the mounting plates using the pre-assembled
bolts on the mounting plates. The rubber grommets should be inserted through
the holes in the windshield so that the flat round part of the grommet lays
flat on both sides of the windshield. On each plate, get both tabs started
before you tighten them both. (see
Figure 1.1 & 1.2)
Note: Tabs
should point away from the headlight when installed correctly.
2.
Loosen the four bolts for the Fats/Slims windshield, then remove the
windshield and set it aside.
3.
Mount the sportshield like the Fats/Slims,
and tighten down all the mounting bolts. (see
Figure 2)
Warning: Never ride with any part of the hardware
missing or loose.

To clean
your windshield, wash it with warm water and a mild, non-abrasive, dishwashing
liquid. Use a soft cloth such as a
T-shirt or flannel cloth.
To protect your windshield,
use NOVUS #2 to remove minor scratches, or use polish specially designed for
plastic. NEVER use glass cleansing agents, they may
cause severe damage to your windshield.
Never use any petroleum-based
chemicals, or cleaning agents with ammonia.
This includes Rain-X, brake
fluid, acetone and gasoline.
SPORTSHIELD MOUNTING KIT, H-D NARROW
|
PART# |
DESCRIPTION |
QTY. |
|
M821 |
MOUNTING INSTRUCTIONS/PART
LIST |
1 |
|
M709 |
MOUNTING PLATE – LEFT
NARROW H-D |
1 |
|
M710 |
MOUNT PLATE RIGHT – NARROW
H-D |
1 |
|
M302 |
1/4”- 20 X 1/2” SS SOCKET
HEAD CAP SCREW |
4 |
|
M504 |
SOCKET SHOULDER WASHER |
4 |
|
M543 |
SANTOPRENE GROMMET |
4 |
|
M505 |
BUTTON NUT |
4 |
FOR MISSING OR REPLACEMENT
PARTS OR WARRANTY
INFORMATION CONTACT:
(901) 853-0293
VISIT US IN
THE WEB AT
customerservice@memphisshades.com