MEM-9840

METRIC NARROW SPORTS SHIELD

MOUNTING PLATE INSTRUCTIONS

 

TOOLS REQUIRED:  3/16” Allen Wrench                       7/16” or 11mm Wrench

 

ALWAYS COVER THE FRONT FENDER AND GAS TANK TO PREVENT ANY POSSIBLE DAMAGE

 

1.    Install the mounting plates on the windshield using the bolts that are pre-assembled on the mounting plates. The rubber grommets shouldbe inserted through the holes in the windshield so that the flat round washer part of the grommet lays flat  on each side of the windshield. On each plate, get both started before you tighten either. (See Figure 1.1 & 1.2)

                                                                                                                                                                                   

       Install Note: *(Narrow) -Tabs point away from each other when installed correctly.

                                         

2.       Loosen the four bolts that are to hold the windshield to the fork clamps, and slide the mounting plates onto the fork clamps. (See figure 2)

 

3.       Adjust the height, angle, and alignment of the shield and tighten down the bolts that hold the windshield to the plates, then the bolts that hold the plates to the fork clamps, then the clamps themselves.

 

4.   Place the non-used windshield in a safe storage area. Preferably in a Memphis Shades windshield storage bag.  Storage                                                                                                                                                                                       bag for Fats/Slims part #MEM0980, Storage bag for Sportshields part #MEM0985.   

 

                      WARNING:  This is a quick disconnect kit.  ALWAYS tighten down all mounting bolts after removing

                      or installing the windshield.                                                 

                                                                                               

 

                   Fig. 1.1   Left side plate        Fig. 1.2 Right side plate         Fig.2 Shows wide plates mounted

                                    

 

 

Care and Cleaning

 

To clean your windshield, use only warm water and a mild non-abrasive, dishwashing liquid. Use a soft cloth, such

as a t-shirt or flannel cloth. To protect your windshield, please use NOVUS #2 to remove minor scratches, or use a

polish like MEMPHIS SHADES SHINOLA which is specially designed for plastic windshields; glass cleansing

agents will cause severe damage to your windshield and will void your warranty.

Never use any glass products, petroleum based chemicals, or cleaning agents with ammonia, bleach or any

harsh chemicaLS. This includes Rain-X brake fluid, acetone, and gasoline.

 

 

 

 

MEM-9840 MOUNTING KIT

METRIC NARROW SPORTSHIELD

 

 

PART #

 

DESCRIPTION

QTY.

 

M840

Mounting Instructions/Parts List

1

M795

Left Mounting Plate

1

M796

Right Mounting Plate

1

M504

Socket Shoulder Washer

4

M505

Button Nut

4

M543

Santoprne Grommet

4

M302

¼”-20 x ½” SS Socket Head Cap Screw

4

 

 

 

FOR MISSING OR REPLACEMENT PARTS OR WARRANTY

 INFORMATION CONTACT:

 

Memphis Shades

 P.O. Box 24

Collierville, TN  38017

(901) 853-0293

 

 

VISIT US ON THE WEB AT

www.memphisshades.com                                                                                 

 

 

 

CUSTOMER SERVICE

customerservice@memphisshades.com