MEM-9842

ACE 750 DELUXE/SABER PLATE ONLY

MOUNTING NSTRUCTIONS

 

TOOLS REQUIRED:  3/16” Allen Wrench                       7/16” or 11mm Wrench

 

ALWAYS COVER THE FRONT FENDER AND GAS TANK TO PREVENT ANY POSSIBLE DAMAGE

 

1.    Install the mounting plates on the windshield using the bolts that are pre-assembled on the mounting plates. The rubber grommet should be inserted through the holes in the windshield so that the flat round part of the washer lays flat on both side of the windshield. On each plate, get both started before you tighten either. (See Figure 1.1 & 1.2)

                                                                                                                                                                              

Install Note:                *(Narrow) -Tabs point away from each other when installed correctly.

                                         

2.       Loosen the four bolts that are to hold the windshield to the fork clamps, and slide the mounting plates onto the fork clamps. (See figure 2)

 

3.       Adjust the height, angle, and alignment of the shield and tighten down the bolts that hold the windshield to the plates, then the bolts that hold the plates to the fork clamps, then the clamps themselves.

 

4.   Place the non-used windshield in a safe storage area. Preferably in a Memphis Shades windshield storage bag.  Storage                                                                                                                                                                                       bag for Fats/Slims part #MEM0980, Storage bag for Sportshields part #MEM0985.   

 

                      WARNING:  This is a quick disconnect kit.  Always tighten down all mounting bolts after removing

                      or installing the windshield every time                                                            

                                                                                               

 

                        Fig. 1.1   Left side plate        Fig. 1.2 Right side plate           Fig.2 Shows wide plates mounted

                                                         

 

 

 

Care and Cleaning

 

Never use any Petroleum based chemicals, or cleaning agents with ammonia

To clean your windshield, use only warm water and a mild, non-abrasive, dishwashing liquid.

Use a soft cloth such as a cotton T-shirt or flannel cloth.  To protect your windshield use

NOVUS #2 to remove minor scratches, or Memphis Shades Shinola* polish specially designed for plastic, glass

cleansing agents will cause severe damage to your windshield, never use any glass products.

This includes Rain-X, brake fluid, acetone, and gasoline.

 

 

 

 

MEM-9842 MOUNTING KIT

ACE 750 DELUXE/SABER SPORTSHIELD

 

PART #

DESCRIPTION

QTY.

M842

MOUNTING INSTRUCTIONS/PART LIST

1

M1003

HONDA 750 ACE/SABER PLATE–LEFT

1

M1004

HONDA 750 ACE/SABER PLATE–RIGHT

1

M505

BUTTON NUT

4

M504

SOCKET SHOULDER WASHER

4

M543

SANTOPRENE GROMMET

4

M302

1/4”- 20 X 1/2” SOCKET HEAD CAP SCREW

4

 

FOR MISSING OR REPLACEMENT PARTS OR WARRANTY

INFORMATION CONTACT:

 

Memphis Shades

P.O. BOX 24

COLLIERVILLE, TN 38017

(901) 853-0293

 

                                       VISIT US ON THE WEB AT:

www.memphisshades.com

 

CUSTOMER SERVICE

customerservice@memphisshades.com