MEM-9848

KAWASAKI VN1500FI SPORTSHIELD 9” HDLT

MOUNTING PLATE INSTRUCTIONS

 

TOOLS REQUIRED:  3/16” Allen Wrench                       7/16” or 11mm Wrench

 

ALWAYS COVER THE FRONT FENDER AND GAS TANK TO PREVENT ANY POSSIBLE DAMAGE

 

1.       Install the mounting plates on the windshield using the bolts that are pre-assembled on the mounting plates. The rubber grommets should be inserted through the holes in the windshield so that the flat round washer part of the grommet lays flat on each side of the windshield. On each plate, get both started before you tighten either. (See Figure 1.1 & 1.2)                                                                                                                                                                                

 

2.       Loosen the four bolts that are to hold the windshield to the mounting brackets, and slide the mounting plates onto the brackets. (See figure 2)

 

3.       Adjust the height, angle, and alignment of the shield and tighten down the bolts that hold the windshield to the plates, then the bolts that hold the plates to the brackets.

 

4.   Place the non-used windshield in a safe storage area. Preferably in a Memphis Shades windshield storage bag.  Storage                                                                                                                                                                                   bag for Fats/Slims part #MEM0980, Storage bag for Sportshields part #MEM0985.   

 

                      WARNING:  This is a quick disconnect kit.  Always tighten down all mounting bolts after removing

                      or installing the windshield every time                                                            

                                                                            

                        Fig. 1.1   Left side plate           Fig. 1.2 Right side plate             Fig.2 Shows wide plates mounted

                                                      

 

 

Care and Cleaning Instructions

 

To clean your windshield, use only warm water and a mild non-abrasive, dishwashing liquid. Use a soft cloth, such

as a T-shirt or flannel cloth. To protect your windshield/ please use Novus #2 to remove minor scratches, or use a

polish like Memphis Shades Shinola which is specially designed for plastic windshields; glass cleansing agents will

cause severe damage to your windshield and will void your warranty.

Never use any glass products, petroleum based chemicals, or cleaning agents with ammonia, bleach or any

Harsh chemicals. This includes Rain-X, Brake Fluid, Acetone, and Gasoline.

MEM-9848 MOUNTING KIT

KAWASAKI VN1500FI 9” HDLT SPORTSHIELD

 

PART #

 

DESCRIPTION

QTY.

 

M848

Mounting Instructions/Parts List

1

M793

Left Mounting Plate

1

M794

Right Mounting Plate

1

M504

Socket Shoulder Washer

4

M505

Button Nut

4

M543

Santoprene Grommet

4

M302

¼”-20 x ½” SS Socket Head Cap Screw

4

 

 

 

FOR MISSING OR REPLACEMENT PARTS OR WARRANTY

INFORMATION CONTACT:

 

 

Memphis Shades

 P.O. Box 24

Collierville, TN  38017

(901) 853-0293

 

 

VISIT US ON THE WEB AT

www.memphisshades.com                                                                                  

 

 

 

CUSTOMER SERVICE

customerservice@memphisshades.com