for KAWASAKI 1600 VULCAN CLASSIC

TOOLS REQUIRED: 6MM Allen Wrench (provided)

3/16” Allen Wrench (provided)

1. Attach the mounting plates to the windshield using the four pre-assembled bolt and button nut assemblies provided.

The rubber grommets should be inserted through the holes in the windshield so that the flat round part of the grommet lays flat on each side of the windshield

Note: The tabs on the mounting plates point in towards each other when installed correctly.

3. Install the windshield by slipping the mounting plates, bottom first, onto the mounting bolts. Adjust the height and angle of the windshield and tighten all mounting bolts.

WARNING: NEVER RIDE WITH ANY OF YOUR MOUNTING HARDWARE MISSING OR LOOSE

Care and Cleaning Instructions

To clean your windshield, use only warm water and a mild non-abrasive, dishwashing liquid. Use a soft cloth, such as a T-shirt or flannel cloth. To protect your windshield, please use Novus #2 to remove minor scratches, or use a polish like Memphis Shades Shinola which is specially designed for plastic windshields; glass cleansing agents will cause severe damage to your windshield and will void your warranty.

Never use any glass products, petroleum based chemicals, or cleaning agents with ammonia, bleach or any harsh chemicals. This includes Rain-X, brake fluid, acetone, and gasoline.

MEM-9878 MOUNTING KIT

SPORTSHIELD for KAWASAKI 1600 VULCAN CLASSIC

PART #	DESCRIPTION	QTY.
M878	Mounting Instructions/Parts List	1
M1039	Left Sportshield Mounting Plate	1
M1040	Right Sportshield Mounting Plate	1
M504	Socket Shoulder Washer	4
M505	Button Nut	4
M543	Santoprene Grommet	4
M302	1/4”- 20 x 1/2” SS Socket Head Cap Screw	4

FOR MISSING OR REPLACEMENT PARTS OR WARRANTY

INFORMATION CONTACT:

Memphis Shades

P.O. Box 24

Collierville, TN 38017

(901) 853-0293

VISIT US ON THE WEB AT

www.memphisshades.com

CUSTOMER SERVICE

customerservice@memphisshades.com