MEM9880

MEMPHIS FATS/SLIMS LOWERS MOUNTING KIT for H-D NARROW,

MOUNTING INSTRUCTIONS / PARTS LIST

 

TOOLS REQUIRED: 3/16” Allen wrench (provided)

 

1.       Attach the lowers plastic to the lowers mounting plates using the pre-assembled bolts and button nuts. Install the components in the order shown in Figure 1.

 

Note: The mounting plate tabs should point away from each other when installed correctly. (see Figure 2)

 

2.       Remove the windshield and set it aside.

 

NOTE: The neoprene washers have been replaced by FOUR Santoprene Grommets. The rubber grommet should be inserted through the holes in the windshield so that the flat part of the grommet lays flat on each side of the windshield.

 

3.       Add the lowers spacers to the fork clamp assemblies, using the longer bolts provided. (see note)  The lowers spacer should go between the beveled socket washer and the existing spacer, or between the beveled socket washer and the fork clamp. (see Figure 3)

 

Note: With the optional 1/8” spacer installed, use the 3/4” long bolt provided (longer). Without the 1/8” spacer installed, use the 5/8” long bolt provided

 

4.       Re-install the windshield in the inner slot. Then, slip the lowers into the outer slot.(see figure 4)

 

5.       Adjust the height and angle and the tighten the four mounting bolts.

 

Warning: Never ride with any part of the mounting hardware missing or loose.

 

             Figure 1-Order of assembly                                                                       Figure 2-Lowers mounted on plates

         

 

              Figure 3-Mounting bolt assembly w/lowers spacer                                          Fig 4.  w/s & lowers mounted on fork

                       

 

 

 

 

MEM-9880 MOUNTING KIT

MEMPHIS FATS/SLIM LOWERS MOUNTING KIT

H-D NARROW, SPRINGER

 

PART #

DESCRIPTION

QTY.

M880

MOUNTING INSTRUCTIONS/PART LIST

1

M505

BUTTON NUT

4

M543

SANTOPRENE GROMMET

4

M504

SOCKET SHOULDER WASHER

4

M302

¼” – 20 X ½” SS SOCKET HEAD CAP SCREW

4

M743

LOWERS MOUNT PLATE – LEFT

1

M744

LOWERS MOUNT PLATE – RIGHT

1

M303

¼” – 20 X ¾” SS SOCKET HEAD CAP SCREW

4

M306

¼” – 20 X 5/8” SS SOCKET HEAD CAP SCREW

4

M560

LOWERS SHOULDER SPACER

4

M313

3/16” SHORT ARM ALLEN WRENCH COVER

1

M310

3/16” SHORT ARM ALLEN WRENCH

1

 

 

FOR MISSING OR REPLACEMENT PARTS OR WARRANTY

INFORMATION CONTACT:

 

Memphis Shades

P.O. BOX 24

COLLIERVILLE, TN 38017

(901) 853-0293

 

VISIT US ON THE WEB AT

www.memphisshades.com

 

 

 

CUSTOMER SERVICE

customerservice@memphisshades.com