MEM9885

SPORTSHIELD LOWERS MOUNTING KIT for H-D WIDE, NARROW, SPRINGER

MOUNTING INSTRUCTIONS / PARTS LIST

 

TOOLS REQUIRED: 3/16” Allen wrench (provided)

 

1.                   Attach the lowers plastic to the lowers mounting plates using the pre-assembled bolts and button nuts. Install the components in the order shown in Figure 1.

 

Note: The neoprene washer has been replaced by four Santoprene grommets. The rubber grommets should be inserted through the holes in the windshield so that the flat round part of the grommet lays flat on each side of the windshield.

             Note: The mounting plate tabs should point away from each other when installed correctly. (see Figure 2)

 

2.                   Remove the windshield and set it aside.

 

3.                   Add the lowers spacers to the fork clamp assemblies, using the longer bolts provided. (see note)  The lowers spacer should go between the beveled socket washer and the existing spacer, or between the beveled socket washer and the fork clamp. (see Figure 3)

 

             Note: With the optional 1/8” spacer installed, use the 3/4” long bolt provided (longer)

              Without the 1/8” spacer installed, use the 5/8” long bolt provided

 

4.                   Re-install the windshield in the inner slot. Then, slip the lowers into the outer slot.(see figure 4)

 

5.                   Adjust the height and angle and the tighten the four mounting bolts.

 

Warning: Never ride with any part of the mounting hardware missing or loose.

    Figure 1-Order of assembly                                                                         Figure 2-Lowers mounted on plates

                

 

      Figure 3-Mounting bolt assembly w/lowers spacer                                 Fig 4.  w/s with lowers mounted on forks

               

                          

 

 

 MEM-9885 MOUNTING KIT

SPORTSHIELD LOWERS H-D NARROW, WIDE, SPRINGER

 

 

PART #

DESCRIPTION

QTY.

M885

MOUNTING INSTRUCTIONS/PART LIST

1

M505

BUTTON NUT

4

M543

SANTOPRENE GROMMET

4

M504

SOCKET SHOULDER WASHER

4

M302

¼” – 20 X ½” SS SOCKET HEAD CAP SCREW

4

M741

SPORTSHIELD LOWERS MOUNTING PLATE - LEFT

1

M742

SPORTSHIELD LOWERS MOUNTING PLATE – RIGHT

1

M303

¼” – 20 X ¾” SS SOCKET HEAD CAP SCREW

4

M306

¼” – 20 X 5/8” SS SOCKET HEAD CAP SCREW

4

M560

LOWER SHOULDER SPACER

4

 

 

FOR MISSING OR REPLACEMENT PARTS OR WARRANTY INFORMATION CONTACT:

 

Memphis Shades

P.O. BOX 24

COLLIERVILLE, TN 38017

(901) 853-0293

 

VISIT US ON THE WEB AT

www.memphisshades.com

 

 

CUSTOMER SERVICE

customerservice@memphisshades.com