MEM-9895

LOW PROFILE INDEPENDENT LOWERS FOR 77MM – 85MM FORKS

INSTRUCTIIONS

 

TOOLS REQUIRED: 3/16” Allen wrench (provided)

 

1.                  Cover the front fender with a towel, in case you drop something.

 

2.          Attach the lowers plastic to the lowers mounting brackets using the pre-assembled  bolts and button nuts. Install the components in the order shown in Figure 1.

 

 Note:  The eight neoprene washers have been replaced by FOUR santoprene grommets. The rubber grommets should be inserted through the holes in the plastic so that the flat round part of the grommet lays flat on each side of the plastic.

 

 

3.         The mounting bracket tabs should point away from each other when installed correctly. (see Figure 2)

 

 

            4.         Install the two clamps onto the fork legs and attach the lowers mounting brackets to the fork clamps.

 

Note: the mounting brackets can be mounted pointing up, for applications where the windshield is too short to reach them otherwise.

 

            5.         Make sure the lowers don’t interfere with anything when the forks are turned all the way in either

                        direction.

 

 

           Fig. 1   Order of assembly                 Fig.2 Position of plate tabs

                                        

 

                  

                           

CARE AND CLEANING

To clean your windshield, wash it with warm water and a mild, non-abrasive, dishwashing liquid. Use a soft cloth such as a T-shirt or flannel cloth.

 

To protect your windshield, use NOVUS #2 to remove minor scratches, or use Memphis Shades Shinola polish specially designed for plastic. NEVER use glass cleansing agents, they may cause severe damage to your windshield.

 

Never use any petroleum-based chemicals, or cleaning agents with ammonia.

 

 

MEM9895

PARTS LIST

LOW PROFILE INDEPENDENT LOWERS FOR 77MM – 85MM FORKS

 

 

 

PART #

DESCRIPTION

QTY.

M895

INSTRUCTION SHEET /PARTS LIST

1

S1085

LOW PROFILE LOWERS BRACKET ASSEMBLY - LEFT

1

S1086

LOW PROFILE LOWERS BRACKET ASSEMBLY - RIGHT

1

S1153

  3X LGE FORK CLAMP ADJ.

2

M313

3/16” ALLEN WRENCH HOLDER (YELLOW CAP)

1

M310

3/16” SHORT ARM ALLEN WRENCH

1

 

 

 

FOR MISSING OR REPLACEMENT PARTS OR WARRANTY

 INFORMATION CONTACT:

 

Memphis Shades

P.O. Box 24

Collierville, TN 38017

(901) 853-0293

 

VISIT US ON THE WEB AT

www.memphisshades.com

 

 

 

CUSTOMER SERVICE

customerservice@memphisshades.com