MEM-9902 MOUNTING KIT

SHOOTER, HELLCAT, DEMON, CLASSIC DEUCE 5 3/4" AND 7"

 

TOOLS REQUIRED:

3/16 Allen wrench (provided)

 

1.      Attach the mounting rod/plate assemblies to the windshield using the santoprene grommet. The rubber 

             grommet should be inserted through the holes in the windshield so that the flat round washer part of the

             grommet lays flat on each side of the windshield. (See Figure 1 & 2)                                                                                                                                                                                                                                                             

 

2.      Hold the windshield up in the desired position so you can see where to mount the handlebar   clamps.

 

3.      Loosely mount the handlebar clamps. (On 7/8” bars, use the sizing bands provided).

 

4.      Slip the mounting rods into the rod holders on the handlebar clamps. Tighten the rod

             holders when the rods are the correct length.

 

5.      Tighten the handlebar clamps next, set your angle, and the tighten the pinch bolts at the

             windshield.

 

        Never ride with any part of the hardware missing or loose.

 

        Figure 1                                                Figure 2                            Figure 3

        (Shows angle rods mounted to w/s)       (Shows right side)                (Shows mounting rods on h-bar clamps)

                                                                                                           

 

 

 

                                                                   

Care and Cleaning

To clean your windshield, wash it with warm water and a mild, non-abrasive, dishwashing liquid. Use a soft cloth such as a soft T-shirt or flannel cloth.

 

To protect your windshield, use NOVUS #2 to remove minor scratches, or use polish specially designed for plastic. Memphis Shades Shinola is recommended for light cleaning or polishing.  NEVER use glass cleansing agents they cause severe damage to your windshield.

 

Never use any petroleum-based chemicals, or cleansing agents with ammonia.

MEM-9902 MOUNTING KIT

DEMON, SHOOTER, HELLCAT, CLASSIC DEUCE 5-3/4" AND 7"

 

PART#

DESCRIPTION

QTY.

M902

MOUNTING INSTRUCTIONS/PARTS LIST

1

M316

LONG ARM ALLEN WRENCH

1

M526

BOTTOM HANDLEBAR CLAMP HALF

2

M525

TOP HANDLEBAR CLAMP HALF

2

M303

1/4” – 20 X 3/4” SS SOCKET HEAD CAP SCREW

2

M306

1/4” – 20 X 5/8” SS SOCKET HEAD CAP SCREW

2

M346

1/4” – 20 X 1-1/8” SS SOCKET HEAD CAP SCREW

2

M545

7/8” TO 1” HANDLEBAR SIZING BAND

2

M503

ROD HOLDER

2

M504

SOCKET SHOULDER WASHER

4

M302

1/4” – 20 X 1/2”SS SOCKET HEAD CAP SCREW

6

M550

GROOVED END ROD

2

M506

CENTER SOCKET ROD COLLAR

2

M535

TRIPLATE

2

M505

BUTTON NUT

6

M543

SANTOPRENE GROMMET

4

 

FOR MISSING OR REPLACEMENT PARTS OR WARRANTY

INFORMATION CONTACT:

 

Memphis Shades

P.O. BOX 24

COLLIERVILLE, TN 38017

(901) 853-0293

 

 

VISIT US ON THE WEB AT

  www.memphisshades.com 

 

CUSTOMER SERVICE

customerservice@memphisshades.com