MEM 9931

SPORTSHIELD MOUNTING KIT, *H-D WIDE

INSTRUCTIONS / PARTS LIST

TOOLS REQUIRED: 3/16” Allen wrench (provided)

1. Install the mounting plates onto the windshield using the pre-assembled bolts on the mounting plates. Use neoprene washers on both sides of the windshield. On each plate, get both tabs started before you tighten them.

(see Figure 1.1 & 1.2)

Note: *(Wide) – Tabs point in towards each other.

2. Loosely install the four fork clamps on the forks, approximately two inches apart. (see Figure 2)

Note: 1/8” spacer washer and ½” socket screw are for pre-1980 models, to space the plates away from the fork.

3. Loosen the four mounting bolts that are to hold the mounting plates to the fork clamps, and slide the mounting plates onto the fork clamps. (see Figure 3)

4. Adjust the height, angle, and alignment of the shield. Carefully check gas tank clearance, and tighten all mounting bolts.

WARNING: This is a quick disconnect kit. Always tighten down all mounting bolts after removing or installing the windshield every time.

Fig. 1.1 Left side plate Fig. 1.2 Right side plate Fig. 2 fork clamps Fig. 3 shows mounting of plates

Care and Cleaning Instructions

To clean your windshield, use only warm water and a mild non-abrasive, dishwashing liquid. Use a soft cloth, such as a T-shirt or flannel cloth. To protect your windshield, please use Novus #2 to remove minor scratches, or use a polish like Memphis Shades Shinola which is specially designed for plastic windshields; glass cleansing agents will cause severe damage to your windshield and will void your warranty.

Never use any glass products, petroleum based chemicals, or cleaning agents with ammonia, bleach or any harsh chemicals. This includes Rain-X, brake fluid, acetone, and gasoline.

MEM-9931 MOUNTING KIT

SPORTSHIELD H-D WIDE

PART#	DESCRIPTION	QTY.
M931	MOUNTING INSTRUCTIONS/PART LIST	1
M302	1/4” – 20 X 1/2” SS SOCKET HEAD CAP SCREW	12
M301	1/4” – 20 X 3/8” SS SOCKET HEAD CAP SCREW	4
M559	1/8” X 3/4” BEVELED SPACER WASHER	4
M520	INNER ADJUSTABLE FORK CLAMP HALF	4
M521	OUTER ADJUSTABLE FORK CLAMP HALF	4
M501	BEVELED SOCKET WASHER	4
M711	SPORTSHIELD MOUNTING PLATE - LEFT, H-D WIDE	1
M712	SPORTSHIELD MOUNTING PLATE - RIGHT, H-D WIDE	1
M310	3/16” SHORT ARM ALLEN WRENCH	1
M313	3/16” SHORT ARM ALLEN WRENCH COVER	1
M314	3/16” T-HANDLE ALLEN WRENCH	1
M337	3/16” T-HANDLE ALLEN WRENCH COVER	1
M504	SOCKET SHOULDER WASHER	4
M543	SANTOPRENE GROMMET	4
M505	BUTTON NUT	4

FOR MISSING OR REPLACEMENT PARTS OR WARRANTY

INFORMATION CONTACT:

Memphis Shades

P.O. BOX 24

COLLIERVILLE, TN 38017

(901) 853-0293

VISIT US IN THE WEB AT

www.memphisshades.com

CUSTOMER SERVICE