MEM 9934

SPORTSHIELD MOUNTING KIT

 KAWASAKI 1600 MEANSTREAK/SUZUKI 1600 MARAUDER

INSTRUCTIONS/PARTS LIST

 

TOOLS REQUIRED:  3/16” Allen wrench (provided)

 

1.                  Install the mounting plates onto the windshield using the pre-assembled bolts on the mounting plates. The rubber grommet should be inserted through the holes in the windshield so that the flat round washer part of the grommet lays flat on each side of the windshield. On each plate, get both started before you tighten either. (see Figure 1.1 & 1.2)

 

            Note:    *(Wide)      – Tabs point in towards each other.

 

2.                  Loosely install the four fork clamps on the forks.  Spacing between clamps is 1.750”  (see Figure 2)

 

             Note: Clamps with the stainless steel washers are placed at top of forks

 

3.                  Loosen the four mounting bolts that are to hold the mounting plates to the fork clamps, and slide the mounting plates onto the fork clamps. (see Figure 3)

 

4.                  Adjust the height, angle, and alignment of the shield. Carefully check gas tank clearance, and tighten all mounting bolts.

 

WARNING:   This is a quick disconnect kit. Always tighten down all mounting bolts after removing or installing the windshield every time.

 

      Fig. 1.1 Left side plate    Fig.1.2 Right side plate      Fig. 2 fork clamps                       Fig. 3  Mounting plate

FRONT OF BIKE

 

 


Care and Cleaning Instructions

 

To clean your windshield, use only warm water and a mild non-abrasive, dishwashing liquid. Use a soft cloth, such as a T-shirt or flannel cloth. To protect your windshield, please use Novus #2 to remove minor scratches, or use a polish like Memphis Shades Shinola which is specially designed for plastic windshields; glass cleansing agents will cause severe damage to your windshield and will void your warranty.

Never use any glass products, petroleum based chemicals, or cleaning agents with ammonia, bleach or any harsh chemicals. This includes Rain-X, brake fluid, acetone, and gasoline.

 

 

 

 

MEM-9934 MOUNTING KIT

KAWASAKI 1600 MEANSTREAK/SUZUKI 1600 MARAUDER

 

 

PART #

DESCRIPTION

QTY.

M934

MOUNTING INSTRUCTIONS/PARTS LIST

1

M1009

LEFT MEANSTREAK MOUNTING PLATE

1

M1010

RIGHT MEANSTREAK MOUNTING PLATE

1

M301

1/4" - 20 X 3/8" SS SOCKET HEAD CAP SCREW

4

M302

¼” – 20 X ½” SS SOCKET HEAD CAP SCREW

4

M303

1/4" - 20 X 3/4" SS SOCKET HEAD CAP SCREW

4

M369

SS FLAT WASHER

2

M523

LARGE INNER ADJ. FORK CLAMP

4

M522

LARGE OUTER ADJ. FORM CLAMP

4

M501

BEVELED SOCKET WASHER

4

M504

SOCKET SHOULDER WASHER

4

M505

BUTTON NUT

4

M543

SANTOPRENE GROMMET

4

M310

3/16" SHORT ARM ALLEN WRENCH

1

M313

3/16” SHORT ARM ALLEN WRENCH COVER

1

M314

3/16” T-HANDLE ALLEN WRENCH

1

M337

3/16” T-HANDLE ALLEN WRENCH COVER

1

 

 

FOR MISSING OR REPLACEMENT PARTS OR WARRANTY

INFORMATION CONTACT:

 

 

Memphis Shades

P.O. BOX 24

COLLIERVILLE, TN 38017

(901) 853-0293

 

VISIT US ON THE WEB AT

www.memphisshades.com

 

 

CUSTOMER SERVICE

customerservice@memphisshades.com